Products

16alpa-Hydroxyprednisolone acetate

Item number	690402
CAS	86401-80-1
Formula	C23H30O7
Molecular weight	418,00 g/mol
Quantity	1x5mg
storage conditions	20 °C
CoA / MSDS	Retrieve CoA Retrieve MSDS Show Safety Data Sheet online

Price

Safety Data Sheet	according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate May 23, 2026
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:	16alpa-Hydroxyprednisolone acetate
Catalog No.:	690402
Relevant identified uses of the substance or mixture	Identified: Laboratory chemical uses: R&D
Uses advised against:	HPC Standards Inc 271 17th Street, NW, Suite 1750 Atlanta, GA 30363 Tel. +1 (678) 244-1536 Fax. +1 (404) 586-6820 sales@hpc-standards.us
Emergency telephone number	HPC Standards Tel. +1 (678) 244-1536 This number is only available during office hours.
HAZARDS IDENTIFICATION	Hazardous Ingredients 16alpha-Hydroxyprednisonlone acetate GHS label elements, including precautionary statements
Label elements
Pictogram	GHS07 exclam exclam
	Signal word WARNING Hazard statement(s) H317 H317 May cause an allergic skin reaction H319 H319 Causes serious eye irritation Precautionary statement(s) P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
COMPOSITION/INFORMATION ON INGREDIENTS
Formula	C23H30O7
Molecular Weight (g/mol)	418.00
CAS-No.	86401-80-1
FIRST AID MEASURES	Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with clean, running water for at least 15 minutes while keeping eyes open. Cool water may be used. Seek medical attention. Skin Contact: After contact with skin, wash with generous quantities of running water. Gently and thoroughly wash affected area with running water and nonabrasive soap. Cool water may be used. Cover the affected area with emollient. Seek medical attention. Wash any contaminated clothing prior to reusing. Inhalation: Remove the victim from the source of exposure to fresh, uncontaminated air. If victims breathing is difficult, administer oxygen. Seek medical attention. Ingestion: Do NOT induce vomiting. Give water to victim to drink. Seek medical attention.
FIRE-FIGHTING MEASURES	Extinguishing media: Carbon dioxide, dry chemical powder, alcohol or polymer foam. Special fire fighting procedures: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Unusual fire and explosion hazards/ decomposition of product: Emits toxic fumes under fire conditions.
ACCIDENTAL RELEASE MEASURES	Steps to be taken if material is spilled or otherwise released into the environment - Wear Appropriate respirator, impervious boots and heavy rubber (or otherwise impervious) gloves. Scoop up solid material or absorb liquid material and place into appropriate container. Ventilate area and wash affected spill area after pickup is complete. Wash skin immediately with plenty of water. Place solid or absorbed material into containers and close for disposal.
HANDLING AND STORAGE	Avoid prolonged exposure. Use caution when handling. Exposure to any chemical should be limited. Do not breath dust or vapor. Have safety shower and eye wash available. Do not get in eyes, on skin or on clothing. Keep container tightly closed. Store in a cool, dry, well-ventilated place. Ensure adequate ventilation during use. Use only in a chemical fume hood. To the best of our knowledge, the health hazards of this product have not been fully investigated. This product is provided solely for the purpose of research and development.
EXPOSURE CONTROLS/PERSONAL PROTECTION	Wear Protective safety goggles. Wear chemical-resistant gloves. Wear protective clothing and chemical resistant boots. Ensure ventilation during use. After contact with skin, wash immediately.
PHYSICAL AND CHEMICAL PROPERTIES	Appearance: solid Molecular Formula: C23H30O7 Molecular Weight: 418.49
STABILITY AND REACTIVITY	Incompatibilities: Strong oxidizing agents Strong acids and bases Hazard Decomposition Products Carbon carbon monoxide carbon dioxide
TOXICOLOGICAL INFORMATION	Acute effects: Irritant May be harmful by ingestion and inhalation. Material is irritating to mucous membranes and upper respiratory tract. To the best of our knowledge, the toxicological properties of this product have not been fully investigated or determined.
ECOLOGICAL INFORMATION	Mobility: Data not known Persistence and degradability: No data available Cumulative potential: No data available Other adverse effects: No data available
DISPOSAL CONSIDERATIONS	Absent other actions demanded by federal or local regulations - Dissolve or mix the material with a combustible solvent and burn in a requlated, chemical incinerator equipped with after burner and scrubber. Observe all federal, state and local laws.
TRANSPORT INFORMATION	Shipping Name Classed non-hazardous for shipment
REGULATORY INFORMATION	Adhere to all Federal, State and local regulations
OTHER INFORMATION	The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only!