Hotline:
+1 (678) 244-1536
sales@hpc-standards.us
271 17th Street, NW, Suite 1750
Atlanta, GA 30363

US Shop 


New user? / Forgot your password?

2,6-Dichlorodiphenylamine

Item number687087
CAS15307-93-4
FormulaC12H9Cl2N
Molecular weight238,11 g/mol
Quantity 1x100mg
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Show Safety Data Sheet online
2,6-Dichlorodiphenylamine

Price

On request

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate May 23, 2026
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:2,6-Dichlorodiphenylamine
Catalog No.:687087
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards Inc

271 17th Street, NW, Suite 1750
Atlanta, GA 30363


Tel. +1 (678) 244-1536
Fax. +1 (404) 586-6820

sales@hpc-standards.us

Emergency telephone numberHPC Standards Tel. +1 (678) 244-1536
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Short-term (acute) aquatic hazard (Category 1), H400
Long-term (chronic) aquatic hazard (Category 1), H410
For the full text of the H-Statements mentioned in this Section, see Section 16.
Label elements
PictogramGHS07 exclam
exclam
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
Supplemental Hazard
Statements
none
Reduced Labeling (<= 125 ml)
Pictogram
Signal word Warning
Hazard statement(s) none
Precautionary
statement(s)
none
Supplemental Hazard
Statements
none
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Substances
Synonyms : Benzenamine, 2,6-dichloro-N-phenyl-
N-Phenyl-2,6-dichloroaniline
Formula : C12H9NCl2
Molecular weight : 238,12 g/mol
CAS-No. : 15307-93-4
EC-No. : 239-349-0
Component: 2,6-Dichloro-N-phenylaniline
CAS-No. : 15307-93-4
EC-No. : 239-349-0
Classification:Skin Irrit. 2; Eye Irrit. 2; Aquatic Acute 1; Chronic 1; H315, H319, H400, H410 M-Factor - Aquatic Acute: 1 M-Factor - Aquatic Chronic: 1Aquatic
Concentration:<= 100 %
For the full text of the H-Statements mentioned in this Section, see Section 16.
FormulaC12H9Cl2N
Molecular Weight (g/mol)238.11
CAS-No.15307-93-4
FIRST AID MEASURES4.1 Description of first-aid measures
General advice
Show this material safety data sheet to the doctor in attendance.
If inhaled
After inhalation: fresh air.
In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with
water/ shower.
In case of eye contact
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact
lenses.
If swallowed
After swallowing: immediately make victim drink water (two glasses at most). Consult a
physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Water Foam Carbon dioxide (CO2) Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
Nitrogen oxides (NOx)
Hydrogen chloride gas
Combustible.
Vapors are heavier than air and may spread along floors.
Forms explosive mixtures with air on intense heating.
Development of hazardous combustion gases or vapours possible in the event of fire.
5.3 Advice for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by
keeping a safe distance or by wearing suitable protective clothing.
5.4 Further information
Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire
extinguishing water from contaminating surface water or the ground water system.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact.
Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures,
consult an expert.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions
(see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid
generation of dusts.
6.4 Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE7.1 Precautions for safe handling
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Tightly closed. Dry.
Storage stability
Recommended storage temperature
2 - 8 °C
Storage class
Storage class (TRGS 510): 11: Combustible Solids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Ingredients with workplace control parameters
8.2 Exposure controls
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin protection
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:KCL 741 Dermatril® L
Body Protection
protective clothing
Respiratory protection
required when dusts are generated.
Our recommendations on filtering respiratory protection are based on the following
standards: DIN EN 143, DIN 14387 and other accompanying standards relating to
the used respiratory protection system.
Recommended Filter type: Filter type P2
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
Control of environmental exposure
Do not let product enter drains.
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Physical state crystalline
b) Color beige
c) Odor No data available
d) Melting
point/freezing point
Melting point/range: 48 - 50 °C
e) Initial boiling point
and boiling range
115 °C at 0,01 hPa
f) Flammability (solid,
gas)
No data available
g) Upper/lower
flammability or
explosive limits
No data available
h) Flash point 110 °C - closed cup
i) Autoignition
temperature
No data available
j) Decomposition
temperature
No data available
k) pH No data available
l) Viscosity Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
m) Water solubility No data available
n) Partition coefficient:
n-octanol/water
No data available
o) Vapor pressure No data available
p) Density No data available
Relative density No data available
q) Relative vapor
density
No data available
r) Particle
characteristics
No data available
s) Explosive properties No data available
t) Oxidizing properties none
9.2 Other safety information
No data available
STABILITY AND REACTIVITY10.1 Reactivity
Forms explosive mixtures with air on intense heating.
A range from approx. 15 Kelvin below the flash point is to be rated as critical.
The following applies in general to flammable organic substances and mixtures: in
correspondingly fine distribution, when whirled up a dust explosion potential may generally
be assumed.
10.2 Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Strong heating.
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - male and female - > 5.000 mg/kg
Inhalation: Irritating to respiratory system.
Dermal: No data available
Skin corrosion/irritation
Skin - Rabbit
Result: Irritating to skin. - 24 h
(Draize Test)
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitization
Maximization Test - Guinea pig
Result: Does not cause skin sensitization.
Germ cell mutagenicity
Test Type: Ames test
Test system: S. typhimurium
Result: negative
Carcinogenicity
No data available
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
11.2 Additional Information
Endocrine disrupting properties
Product:
Assessment : The substance/mixture does not contain
components considered to have endocrine
disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU)
2017/2100 or Commission Regulation (EU)
2018/605 at levels of 0.1% or higher.
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated.
ECOLOGICAL INFORMATION12.1 Toxicity
Toxicity to fish mortality LC50 - Oncorhynchus mykiss (rainbow trout) - 1,2 mg/l -
96 h
Toxicity to algae static test EC50 - Desmodesmus subspicatus (green algae) - 0,62
mg/l - 72 h
12.2 Persistence and degradability
Biodegradability aerobic
Result: - Not readily biodegradable.
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Endocrine disrupting properties
Product:
Assessment : The substance/mixture does not contain components
considered to have endocrine disrupting properties
according to REACH Article 57(f) or Commission
Delegated regulation (EU) 2017/2100 or Commission
Regulation (EU) 2018/605 at levels of 0.1% or higher.
12.7 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
See www.retrologistik.com for processes regarding the return of chemicals and
containers, or contact us there if you have further questions.
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 3077 IMDG: 3077 IATA: 3077
14.2 UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2,6-Dichloro-Nphenylaniline)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2,6-Dichloro-Nphenylaniline)
IATA: Environmentally hazardous substance, solid, n.o.s. (2,6-Dichloro-Nphenylaniline)
14.3 Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9
14.4 Packaging group
ADR/RID: III IMDG: III IATA: III
14.5 Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: yes
14.6 Special precautions for user
Further information
EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and
combination packagings containing inner packagings with Dangerous Goods > 5L for liquids
or > 5kg for solids.Packages smaller than or equal to 5 kg / L , not dangerous goods of
Class 9
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
National legislation
Seveso III: Directive 2012/18/EU of the European
Parliament and of the Council on the control of
major-accident hazards involving dangerous
substances.
: ENVIRONMENTAL HAZARDS
Other regulations
Take note of Dir 94/33/EC on the protection of young people at work.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!